![RSP Offset Rules](/img/3spalten/rsp-offsetbaender-c.jpg)
The classic method for perforating, diecutting and creasing in offset printing
Fixed to the impression cylinder and working with the protective blanket. Use our CITO RSP processing lines also for short runs.
We have replaced our offset rules with the higher quality RSP processing rules. Take advantage of better rule quality and the resulting cutting result.
Note: For use with RSP System 2.0 and RSP Easy, please click here.
Recommendation for Selection of RSP Perforating Rules
Material to be inprinted | Use | Direction | Rules |
---|---|---|---|
Up to100 g/m² coated | e.g. forms, order forms | vertical and horizontal to perforation | 4 tpi, 16 tpi, 18 tpi, 35 tpi, 50 tpi |
Up to200 g/m² coated and uncoated | Postcards | vertical and horizontal to perforation | 12 tpi, 16 tpi, 18 tpi |
Flyers | vertical and horizontal to perforation | 12 tpi | |
Calendars | vertical to perforation | 12 tpi, (8 tpi) | |
horizontal to perforation | 4 tpi, 8 tpi | ||
150 g/m² – 300 g/m² coated glossy or non glossy | Envelopes | vertical and horizontal to perforation | 12 tpi, 16 tpi |
Cards | vertical and horizontal to perforation | 8 tpi, 12 tpi |
Note:
The values mentioned above are a rough guide for standard materials and are not binding.
The following items have an imporant infl uence on the correct perfo rule:
- weight of the material to be printed
- direction
- coated paper
- uncoated paper
- form of perforation
For special requirements a test perforation with all variations should be made on a print sheet with the respective material to be printed.
RSP Perforating Rules
tpi = teeth per inch | ||||
Description | Cut : pitch | Contents | Unit | Order no. |
---|---|---|---|---|
RSP Perforating Rule 4 tpi | 6.0 : 0,7 | 6 m | 1 reel | BRF00011 |
RSP Perforating Rule 8 tpi | 2.4 : 0.8 | 6 m | 1 reel | BRF00001 |
RSP Perforating Rule 12 tpi | 1.4 : 0.8 | 6 m | 1 reel | BRF00002 |
RSP Perforating Rule 16 tpi | 0.8 : 0.8 | 6 m | 1 reel | BRF00003 |
RSP Perforating Rule 18 tpi | 0.7 : 0.7 | 6 m | 1 reel | BRF00010 |
RSP Perforating Rule 35 tpi | 0.3 : 0.4 | 6 m | 1 reel | BRF00004 |
RSP Perforating Rule 50 tpi | 0.2 : 0.3 | 6 m | 1 reel | BRF00005 |
RSP Cutting Rule
Description | Contents | Unit | Order no. |
---|---|---|---|
RSP Cutting Rule | 6 m | 1 reel | BRF00008 |
RSP Creasing Rules
Creasing rule specially matched to the use of RSP components with different heights. The R1 creasing rule is used for only creasing, because it is the same height as a cutting or perforation rule.
However, in the case of a multiple use with creasing and/or cutting or perforating, the R2 creasing rule has to be used because this has a lower overall height.
Description | Contents | Unit | Order no. |
---|---|---|---|
RSP Creasing Rule / R1 | 6 m | 1 reel | BRF00006 |
RSP Creasing Rule / R2 | 6 m | 1 reel | BRF00007 |
Download
Stand: 2024-08-23T19:01:15+02:00